港ディレクトリ
(Pleasure Craft) Flytec HQ2011-1
仕様
- 船長
- 14" (35.56 cm)
- モータータイプ
- Brushed
- 駆動方式
- 257
- プロップ
- 260
- バッテリータイプ
- LiFe
- プロップタイプ
- 312
- 実行時間
- 353 min
- モデル速度
- 370 km/h (229.9mph)
写真
このボートについて
I was feeling bored and saw this cheap Chinese toy boat advertised on t'internet. As I say it was cheap but it did have something of a passing resemblance to an Aquarama.... so I ordered one and when it arrived it really didn't look too bad.
The down side was the radio gear was 27MHz and comprised just two forward and reverse switches to give forward, back and turn functions, but with no variable speed control. But then I wasn't expecting much anyway. So opening it up the innards were a doddle to remove and were replaced with a 2.4GHz receiver, esc, servo and rudder assembly. Thought about trying to fit water cooling but there really was no signifficant heat generated so it didn't seem worth it
Photos seen elsewhere show the boat to plough pretty inelegantly through the water so spray rails and a couple of strakes were fitted to the hull to hopefully improve things in that regard.
Anyway it's all back together now with everything working just fine, but I haven't had a chance to put it in the water yet (well it's been in the bath to make sure it floats but that's all)
Looking forward to taking it out when the opportunity arises. in the meantime it's looking good on the shelf in the summerhouse and I am looking for the next project.
I have to say that I have no illusions about my own abilities and I am totally in awe of the builds seen here.
Nobody told me this would be addictive! (4/10)
The down side was the radio gear was 27MHz and comprised just two forward and reverse switches to give forward, back and turn functions, but with no variable speed control. But then I wasn't expecting much anyway. So opening it up the innards were a doddle to remove and were replaced with a 2.4GHz receiver, esc, servo and rudder assembly. Thought about trying to fit water cooling but there really was no signifficant heat generated so it didn't seem worth it
Photos seen elsewhere show the boat to plough pretty inelegantly through the water so spray rails and a couple of strakes were fitted to the hull to hopefully improve things in that regard.
Anyway it's all back together now with everything working just fine, but I haven't had a chance to put it in the water yet (well it's been in the bath to make sure it floats but that's all)
Looking forward to taking it out when the opportunity arises. in the meantime it's looking good on the shelf in the summerhouse and I am looking for the next project.
I have to say that I have no illusions about my own abilities and I am totally in awe of the builds seen here.
Nobody told me this would be addictive! (4/10)
がいいねしました
読み込み中…
コメント
サインイン コメントするには。
まだコメントはありません。