制作ブログ一覧
1,163 blogs ・ ページ 1 of 49Nauticurso U.S. Sub Chaser AV-SC96
作成者: chugalone100SILVER
U.S. Sub Chaser AV-SC96 – A Commissioned Build for Model Expo This was a build I completed a few years ago, commissioned by Model Expo. T…
Sea Rover by Aerokits
作成者: canabus
Hi All This was a restoration project from last year !!! It was at best a basket case,but, I had to have one. It looked bad and when it a…
3D Printed Schooner
作成者: ColRay
Chocks Away I have found a very small image in CAD format ,that I will modify in Tinkercad or FreeCAD for my next project. Okay the start…
Fairey Huntsman 31
作成者: ChrisFBRONZE
This build is around the same percentage complete as my Swordsman - the hull is further forward with the bottom and sides being painted b…
Fairey Swordsman 33
作成者: ChrisFBRONZE
The hull sides have been painted white and will now be left for a week or more for the paint to harden. Reason I leave it that long is I …
Nellie G.
作成者: FishercatBRONZE
I'm designing what I hope to be an interesting build. It's definitely challenging for me! I started with the Freedom Song Boatworks kit o…
Construction report "Pilot Cutter Britannia" 1 : 24
作成者: WolleSILVER
Hello After the construction is before the construction!!! The construction trailer is tidied up and I am full of energy. After I have co…
1854 'Clipper' Tayleur Build.
作成者: Avoca
Hi all, A new day, new information and... and new project. Planning to assemble a large scale wooden, or mixed media, replica of the RMS …
The Brooklyn Tug
作成者: jumpuglyGOLD
Well my friends, I've gone and done it again. Through some dumb luck I stumbled upon a reasonably priced discontinued bucket-list kit tha…
Solent Spear
作成者: ChrisFBRONZE
A discussion has started on another thread (Bobs,* A Super Rapier*) and this is going to continue so thought it best to start one of its …
Classic Model Power Boats. 1950's onwards.
作成者: zoomaBRONZE
Classic Model Power Boats is a title that I have used for many years to describe the group of model boats that most interest me and that …
Lesro Sportsman restoration
作成者: canabus
Hello Shipmates Well thanks to Zooma I have a hull to work with and its in good order. But me been-ing me I am removing a lot of nails. R…
Fairey Fisherman 27
作成者: ChrisFBRONZE
Made the bilge keels from two laminations of mahogany sheet to get the correct thickness and then glued them in place. Once this was done…
ARTUR — A Norwegian Fishing Boat by Nauticurso (1:32 Scale)
作成者: chugalone100SILVER
# Building Log: ARTUR — A Norwegian Fishing Boat by Nauticurso (1:32 Scale) ## Introduction Welcome to my new building log! This project …
Forceful Directors Class Paddle tug
作成者: Kevin55SILVER
I’m in the middle of building a 1:48 Directors‑class paddle tug — Forceful. I’m using the fibreglass hull and working from plan No. 1292,…
Aeronaut Graf Spee
作成者: whittonm
I bought this kit about 10 years ago from a German model shop. It is definitely old-school, with great detailed plans, detailed stock lis…
Pacific North West log tug
作成者: Chum444SILVER
I’ve had this hull for a few years & am now getting to building a model of Harken Towing’s tug HARKEN No 1. As per my usual it will not b…
MMM Lady "T"
作成者: FredBRONZE
Hi Please remember that this is only about my Lady “T”. I don’t seem to remember if I have started this story before, so here goes. This …
1/5th Scale Riva Aquarama
作成者: DJW
The build actually started over four years ago and is documented on another forum. I've added some pics that indicate the current state o…
Project Amsterdammertje
作成者: PeterN
Since the weather is going into fall mode I decided to pick up a project that I had laying around. It is a compact tugboat called een Ams…
Might be a Chris Craft Catalina
作成者: GARTH
A fellow in the model boat club started this build but did not finish.I was given the model to finish up. She's a scratch-built 34-inch x…
Rapier X.
作成者: zoomaBRONZE
The recent (and on-going) interest in the LesRo Rapier has now reached a peak where more people would like to own one than there are avai…
A Spy In My Workshop?
作成者: zoomaBRONZE
Can you see me? This characterisation of myself in my workshop that chugalone100 has produced is worryingly accurate. It depicts my fondn…
Restoration of a classic
作成者: Chum444SILVER
I came across this “mutt”. A 1/24 scale 50 ft Chris Craft Catalina. The original kit was produced by Sterling sometime between 1950 & 198…