Modified Vivacity with Home built engine

掲載者 GeorgeH · 4年前

仕様

船長: 39" (99.06 cm)
モータータイプ: Nitro
駆動方式: Direct
プロップ: Single

写真

このボートについて

Working on scratch-built Vic Smeed design Vivacity from plans
All wood planks cut from white cedar on the table saw.

Need to find a neater way of cutting out the windows. On the sides.
I used a drill on the corners then went in with a Dremel tool cutting wheel. Still working on cleaning up the edges with a sanding stick.

Any suggestions on the best was to get accurate window outlines?

いいね 3 いいねs

がいいねしました Madwelshman and Colin H and

GaryLC Silver
コミッショナー4年前
All a question of the right saw blade in a clamping type handle, if stuck there is always the option of making something to suit, as per grinding down a hack-saw blade tapered to a point, and a couple of inches long, will suffice rather nicely. Of course, there is always the internet option of finding the right tool for the job at hand. Regards, Gary.
いいね4
がいいねしました Dumaspittman and stevedownunder and
Aerostar55
マスターシーマン4年前
Thanks for the tip. I have an old scroll saw. Unfortunately, the proper blades for it are rather scarce!
いいね2
がいいねしました Dumaspittman and stevedownunder
ChrisF Bronze
提督4年前
I use a scroll saw but failing that you could use a coping saw and then sand to the lines. Using a cutting wheel is a bit awkward, especially with small windows and curves.
いいね3
がいいねしました stevedownunder and Peejay and

MODEL BOATS WEBSITE

Modified Vivacity with Home built engine

仕様

写真

このボートについて

コメント