More great photos in this series taken by my friend at Albert Park Lake in Melbourne. These of my P28 - Ensign Simitzopoulos. Great wave patterns. These photos were all poster size in detail. I have had to shrink them to get them posted here. This boat is in my harbour.

The 1/35 scale boat is scratch-built, mainly from Balsawood and marine ply with a fibreglass covering. The guns can elevate and rotate. The radar units both rotate and there are LED navigation lights that I forgot to turn on. There is also a flashing red LED strobe warning system. It needs a little work to get the 4 LEDs a bright brighter.

Perkasa MTB

A favourite model boat there must have been hundreds if not thousands made.
When I brought mine there was a choice between two sizes 36in (90cm) or 48in (120cm) and then you could choose between a wooden hull or a fibreglass hull. I went for the smaller boat with the fibreglass hull. this was back in the 1980s.

Background of the boat
The boats Perkasa class consisted of three motor torpedo boats built by Vosper (UK) for the Malaysian Navy as follows:-

Perkasa 150
Penula 151
Handalan 152

This model has 3 motors, port & starboard are Graupner 600s and one 700 type in the centre runs 3 ESCs front and rear guns operate via servos, with flashing LEDs down the barrels.

Built from a Linkspan model kit, with additional crew and passengers with all decks lit with LEDs

Built in 2016, she is a 1:14 scale Dumas 40 ft. UTB, which I did my best to keep natural wood wherever possible. Powered by twin 775 size 12 volt Johnson type motors turning Raboesch 50mm 4-blade brass wheels. I properly illuminated her with Lighthouse 9v LEDs and adorned with a BECC USCG Ensign. I overbuilt her like my Father overbuilt his airplanes.

some more done all electrics complete lights etc motor paired uprx tx leds all 12volt pre wired

these are the blue leds in the cockpit! and on the radar barrel getting inspiration from a you tube video, please comment!

Scratch built 1/48 scale Mersey ferry Snowdrop in current use on the Mersey (ex Woodchurch)
Model interiors fitted out with tables chairs people etc and 72 leds light to Illuminate the interior saloons.
Just completed and maiden voyage on Hoylake Lake on the Wirral.
2.4Ghz radio and a bilge pump just in case. Sails a treat with 100 passengers. Extensive use of plasticard on superstructure. Fibreglass hull from own mould.
See sailing location at www.hoylakemodelboatclub.co.uk
Our club can supply the hull if you want to have a go at building one.

HI " I thought I would put my biggest model from my collection for all to look at ! HMS Avenger took approx 3 years to build . " She is a type 21 frigate at 1/64 scale . At 6 feet long . Scratch built on a fibreglass hull from plywood plastic card & metal parts . Works on a six channel futaba skysport .
Full working red & white leds on deck and cabin , lynxs helicopter with working rotor blades with landing lights. Working radars, bofor gun , A ships whooping sound . Runs on two speed 700 motors off a 12volt gel sell battery which give a good 1hr sailling time . Controlled by a 50 amp speed controller with two brass propshafts behind good size rudders which give a excellant turn .
My model HMS Avenger is a copy from the real ship in which took part in the Falklands war in 1982. Painted in the same grey with a green deck . She looks great on display or on the water . Avenger gets a lot of interest from the general public . please enjoy looking at the photos shown at Sheringham & Eaton park Norwich Norfolk .
" thank you .. A Prestney