#7 7年前

problems cutting 1/8 bulkheads

Ages ago, I bought a band saw, second hand, at the Sunday Market (no longer held, alas). It cost me a princely £12, there were three to choose from, I picked the one that seemed in best nick. Bought 5 different blades off ebay for £13, the first of which is still in it! A wee pot of plastic grease for the bearings and away we went. I have made 4 model boats and heaven knows how many slot car patterns from Ureol (Renshape) and the blade is still sharp enough to snag me when it occasionally comes off the pulleys. By contrast, a scroll saw is fussy, difficult to control and limited in capacity. My son has three (different sizes), but I could never bring myself to abuse them like he does, so for me they'd be too slow and despite being a professional modelmaker, I have absolutely no patience!

Martin

がいいねしました samc

#6 7年前

problems cutting 1/8 bulkheads

👍Thanks for replying, I have been thinking of buy one. Between my model trains, building builds from scratch and know boats.. it might be my next b-day gift to my self. since no one else has any idea on what to by me.
good to know about the saw blades, didn't know that one.

will add the other boat to the harbour. start tonight.
thank you guys for an answer.
I thought it was going to be that answer or answers..
oh yes and its
Wilmington,,, NC...
it is a nice place... real nice.. was just out side NYC and i'm so glad we moved, retired, 10 years ago... it is so nice down here, its not what you would think, its not the deep south,, more of a beach and college town..
thank you again.

Samc

がいいねしました Martin555

#5 7年前

problems cutting 1/8 bulkheads

Hi Sam,
I heartily agree with Martin. A scroll saw is the easiest way.
You don't need to spend hundreds of bucks for what we need.
Since this is your 4th 'woodie' I strongly suspect and hope there will be some more👍
So it's worth a moderate investment. Go for it👍

Found this little job on Amazon.com which should do the job nicely.
Not too expensive, about a 100 green-backs ALL IN, has everything we need and I think you can use standard hand fret saw blades in it (like mine😊) which is usually cheaper than the saw manufacturer's replacement blades.🤑

https://www.amazon.com/Variable-Speed-Scroll-HF-tools/dp/B001NO7UCS/ref=sr_1_3?dchild=1&keywords=scroll+saw&qid=1586887222&refresh=1&rnid=2941120011&s=hi&sr=1-3
Don't know if you're in Wilmington Delaware or North Carolina (my spies are everywhere😁) but I guess it shouldn't matter re delivery.
Let us know how you get on please😊
Cheers, Doug 😎
BTW How about putting the first three boats in your harbour?
We'd love to see what you've been doing👍

Young at heart 😉 Slightly older in other places.😊 Cheers Doug

がいいねしました Martin555 and Scratchbuilder

#4 7年前

problems cutting 1/8 bulkheads

The way i would look at it is If you plan on making a quite a few models then a midrange priced one.
If you only plan on making the one model then there is no point in paying out a small fortune so it is cheeper to purchase a hand coping saw.

As for which one to get i would not say get this one or that one as it will depend on price and the quality that you want.
As you live in the USA then maybe ask in your local DIY stores to see what they recommend and on the availability as it might be difficult with all of the virus lockdowns
I don't know if this helps.

Martin555.

If it looks right it probably is.

がいいねしました samc and MouldBuilder and

#3 7年前

problems cutting 1/8 bulkheads

Thank you
I thought that was going to be the answer.. i guess there is no real simple why,
i guess if your going to build a scratch build boat you should be a electric scroll saw, any ideas on which one
it good ???
thank you for answer
samc

Samc

がいいねしました Scratchbuilder and Martin555

#2 7年前

problems cutting 1/8 bulkheads

Samc

An electric scroll saw is the best and easiest way or a coping saw similar to this sort of thing.
https://www.ebay.co.uk/itm/1-Coping-Saw-Diamond-Wire-Saw-Frame-Jade-Metal-Wire-Saw-Blade-Cutting-Tool-Kit/313018299213?_trkparms=ispr%3D1&hash=item48e158334d:g:IgMAAOSwC9ReX4gi&enc=AQAEAAACYIQvEcHUrT7nmUC3yY5qbPyaBN1nJEDYW8MyypsJPgXK9t7xxMj3q%2B%2B%2Bz%2BPuf4iZrcGqt7sg5N2GeoeEvN3BmsbHVuOP1eMoIraeZANWKZy3L1pKtLzqGNoa4HlbVuLpD6oZ5oOJoO5BeJimaBnSrrVPYkXGuZt38ifX81%2FwdZII40epscSNtLzkKoeurxF39INkPvBtpeFgSnB%2FYpbxySxp6xj%2FGAqvF0ylRackZoq0H5AAFMdxo4csUsjwKJlPbmj%2Fajv4ZPK6MZWyB7M%2BbBq3n16XzpcurK4mAkhMmpKEFu81sRVW67wFs60aZ1OpR28k%2FCCzpVDgE8%2FSom6C7VQZWJ%2BbiNCDKoSUsRrNalxmo3MBrue44a1StntXJi0JvqmWh506SBbWV6dHFFvGjALHYfv6%2FLRKI5gBzQ1AohmOBKvVXgD%2FhCDn2l6s3WYABX42pa34iRbmSAVN1nAo%2Bjn4FWPMOca4zZV3rWTds3HJWzbIYfdr9Y0ENE3TMwsY0in1%2FPJ1VN%2FL8UlugwjnyviuHNmZJMcPSbevQJHSluIDw%2FowAI%2B1y5pNYjINa6tK3icps1jX7lzGZgtFfLDR7EfXGgKMp42sqbz2A7LlaPB1GAImRfqitPQNDmi4HQ6Up6sKxLbcmnYh0XmuGPziCINxo4dVy5Qp8J2siiTOXkSBAnmndWprrwYIhgxKALoFiQzK%2FQnInY%2FaQpEcgKHQctLST9lpL9IwQtMsFF7xOLNU%2B3zZQBxXBqr%2FvzitFHkdQIovrr7PgglkJ3DFUESLPgFuqyCIKBUyIOdlct%2FB9XU6&checksum=313018299213e77facf7e062473289a89b0829840880

Martin555.

If it looks right it probably is.

がいいねしました Scratchbuilder and RNinMunich

#1 7年前

problems cutting 1/8 bulkheads

Hello
last night i looked over my model 1948 Elco 35 Cruisette Model Boat from Marine Model (old)
i bought a while ago, and i know it was going to be missing some parts. so i started to inventor the parts and need to make several bulkheads and others. Ok so i started to cut a N02 bulkhead from the forms / cut out that can with it.. it just seemed like a pain how is was doing it... traced the form onto a piece of 1/8 ply wood and started with hobby knife cutting. too a lot longer
So the question is is there an easier way ??
this is my third wood boat build so i have a little skill
i do not have a electric scroll saw , is that the answer, i should get one or is there a better method. have been playing with the thought of a scratch build of a cabin cruiser. now i'm wondering is i have the skills and patients
any help will help me
Rom seems to know a lot, but i'm not sure how to message him

Samc

がいいねしました Morant and Scratchbuilder and

MODEL BOATS WEBSITE

problems cutting 1/8 bulkheads

フォロワー (2)

problems cutting 1/8 bulkheads

problems cutting 1/8 bulkheads

problems cutting 1/8 bulkheads

problems cutting 1/8 bulkheads

problems cutting 1/8 bulkheads

problems cutting 1/8 bulkheads

problems cutting 1/8 bulkheads