ive no photos at the moment , if you have a photo of what you require , and some dimensions I may be able to assist you .

HI Matt
Which fittings do you require. I make quite a few fittings for my 1/12 scale lifeboats so may be able to help.
Dave

hI could you put some photos of your parts that you make as I need some more for my boat.

cheers matt

re 1/12th scale fittings , I too have had difficulties in finding what I want for my builds , so have resorted to making my own parts from brass , Im currently making ball cleats , Im also looking into the possibility of having them electro plated ! I also make masts, airels and light fittings should anybody else need them fabricating ?

hI guys yes Dave 1-12scale fittings these are thin on ground. I will try macs mouldings as Griff said I don't have ability to make parts so that is why I would rather buy. I have found some white metal stuff that I might try. is your solent near finished Griff. got any photos. I will keep you both posted.thanks lads for help.

cheers Matt

HI Matt,
I am also com pleating a Solent class L/Boat. Try macsmouldings.co.uk for items like lifebelts, access doors, radars and other sundry fittings. They are resin cast and have excellent detail.
Good Luck
Griff

HI Matt
Rather thin on the ground, especially for the Solent model. Model Slipway do some 1/12 scale fittings in white metal and speedline models have some super detail stanchions. The aerials were fairly basic dipoles so I made mine from brass tube and rod, soft soldered where required. I made most of the other fittings from dowel or brass rod/tube but I do have a lathe so turning to shape was possible. if you need to make several bits the same you could try using polyester resin in a silicon mould made from one master - may be useful for the doors / window frames.
Good luck
Dave