#14 10年前

Make what you can and buy what you have to

If people want to use Foamex, that smooth skinned foam type board (no cardboard) I can suggest they go to any decent sized sign maker or exhibition stand design /maker for offcuts. I get all I can handle through my son, who's best mate gets tons of it.
Being entirely plastic, unlike Foamboard, it can't warp.

Martin

がいいねしました John2

#13 10年前

Make what you can and buy what you have to

and in the adjacent handicraft section you can find things like reels of inexpensive and fine silver and brass wire, like I used for the 'balcony' on my U26 👍 soldering needs cleaning up I know! Or stainless steel cable as I used for the handrails just visible at the bottom of the picture 😎 Stanchions are split-pins 😉

Young at heart 😉 Slightly older in other places.😊 Cheers Doug

がいいねしました John2

#12 10年前

Make what you can and buy what you have to

My wife is an amateur dressmaker and drags me round haberdashery shops. I'm surprised at the useful stuff that can be found on the accessories shelves...

#11 10年前

Make what you can and buy what you have to

If looking for good low cost ply log onto the Model Flying site and look for the thread by Enrico Eglasias I got a sample from him and it is really good stuff and low cost. Light and strong.A bit darker colour than pine ply but gives a nice colour when clear .varnished.I think the thread title is something like Plywood Supplies or samples. Different thicknesses available. Regards John👍

#10 10年前

Make what you can and buy what you have to

Whats the new one ?

#9 10年前

Make what you can and buy what you have to

Cost was great and although it was a tough decision to sell her the profit was over three figures!!! Has allowed me to build the new one and have a budget of £190

がいいねしました none

#8 10年前

Make what you can and buy what you have to

GrahamP74

I like the boat and most of all the total cost.. @ £47. Whats not to like..

Foraging about for bits and Pieces is far better than buying a kit
Well that,s my view anyway.

#7 10年前

Make what you can and buy what you have to

I used to look round the local tip but it is now prohibited in my area (Cheshire).

I guess I am just lucky here as they have a little shop on site as well...

#6 10年前

Make what you can and buy what you have to

Strange that this should come up I have just done the same to some steps for the Shamrock Police boat.
Did them last week..

And they look quite nice ..as floor grids or for the steps.

がいいねしました John2

#5 10年前

Make what you can and buy what you have to

PS
On the recycling note
I find that the alu foil from butter tubs (e.g. Kerrygold) is excellent for simulating diamond textured steel decks, companion ways, step & ladder treads (in German - riffle!?) in scale ~ 72 to 100 😎

Young at heart 😉 Slightly older in other places.😊 Cheers Doug

がいいねしました John2

#4 10年前

Make what you can and buy what you have to

Hi from Munich
There is a saying amongst ship modellers here in Germany
"Schiffsmodelbauer sammeln alles was nicht unbedingt in zwei Wochen zu stinken anfängt !"
"Ship modellers collect everything that doesn't start to stink in two weeks!"
On that happy note Goodnight from Munich 😎

Young at heart 😉 Slightly older in other places.😊 Cheers Doug

がいいねしました John2

#3 10年前

Make what you can and buy what you have to

The last model I made was built fully for £47! That included the £30 cost of the hull. I made the majority of parts from PVA board which I got from eBay for £10. Poundland glue and cocktail sticks to hold parts together. Also used wire to add edge to v doors and wire threaded through the forward rails. Made fenders by shaping wooden dowel on the lathe and painting and the best was the net... made from a dyed dishcloth!!! Pics attached of the various stages showing the construction!

がいいねしました onetenor and Inkoust and

#2 10年前

Make what you can and buy what you have to

Hi Sonar
I used to look round the local tip but it is now prohibited in my area (Cheshire).
I agree many industrial sites have waste skips but as you suggest it's best to obtain permission before removing items.
Another source is Freecycle where spare items are offered for free, but you do need to be quick as popular useful items are quickly taken.
Another source are bring and buy sales at model boat shows etc.

Live long and prosper

Dave

がいいねしました John2

#1 10年前

Make what you can and buy what you have to

I have been modeling for a short time and so far I have managed to recycle quite a lot of items Rather than buy something.

Most of my models are recycled to the point of buying the minimum...

Running gear is the exception That I have to buy.

But all in all looking around the house and the local tip for recycled paint and small items has worked out just fine for me.
Costing just a few pounds.

Also a number of local industrial units have a fair bit of useful waste there just for the asking.

So in the end there are several ways to save some cash on this a very addictive hobby..

So any tips from other members to save a few pence ?

Where to look for that material for the next project for free or at a low cost ?

MODEL BOATS WEBSITE

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to

Make what you can and buy what you have to